High & Dry

High & Dry Waterbeds

UK Waterbed Manufacturer

Archive for the ‘waterbed’ tag

Which quality of soft sided waterbed should I buy?

leave a comment

A softsided waterbed buyers guide – price or quality?

High & Dry Waterbeds are manufacturers of the highest quality waterbeds since 1989 we have had to offer a choice of price and quality to our various trade customers throughout the world. Since the evolution of the internet low price has become the demand of most online retailers. Both qualities are now available direct to the public at our low factory prices.

The Olympia softsided waterbed

Olympia Foam Side View

Olympia Foam Side View

 

The Olympia is a well-made softsided waterbed with the same features as most soft sided waterbeds available. We have made some improvements such as the anchoring strip with a double line of fixing screws and much higher quality materials used throughout than other manufacturers use. The fundamental problem is that a piece of foam 9” (23cm) does not have the internal strength and will begin to bow out with the pressure of the water and crumple from the pressure of sitting on the edge. This is a common issue with all waterbeds of this basic design. As the foam begins to lose its shape the mattress will stretch to fill the bigger size. This will create a tension on the surface which will reduce the comfort and support.

 

 

 

The Olympia Deluxe

 The Olympia Deluxe is a significantly superior quality for only an additional £100 Read the rest of this entry »

Would I benefit from dual waterbed mattresses or is one individual (mono) water mattress perfect for me?

leave a comment

Would I benefit from dual waterbed mattresses or is one individual (mono) water mattress perfect for me?

First let’s talk about the principal of a waterbed and the reason that it gives unparalleled comfort.

Dual waterbed mattresses

waterbed mattress

From the simple diagram it is obvious that the displacement of water away from pressure points will result in upward pressure from the mattress being evenly distributed over a much greater area. Consequently this will give far greater comfort than any other sleeping surface.

Adjustment

The beauty of a waterbed is that it can easily be adjusted to give the maximum benefit.

For an individual it is very easy to adjust the support. Read the rest of this entry »

Repairing a Waterbed Mattress

leave a comment

How Do I Repair A Waterbed Mattress?

There are three reasons why a waterbed mattress would leak.

1             A manufacturing defect

2             Accidental damage

3             Your mattress has reached the end of its life

waterbed leak

The first thing to do is not panic. (Generally it looks far worse than it is because the water cannot go under the mattress due to the weight of the mattress, so the water squeezes up in the corners and then it will travel around the edges unless you catch it in time.)

Check the safety liner is above the water level so water cannot come out of the waterbed.

Unplug the waterbed heater.

Obtain a waterbed repair kit.

 

How to locate the leak in a waterbed mattress. Read the rest of this entry »

Written by High & Dry Waterbeds

July 19th, 2012 at 11:30 am

Refilling a Waterbed Mattress

leave a comment

Filling A Waterbed Mattress.

Most waterbed retailers will offer an installation service but if you are confident that you could manage this yourself we have written this guide to help. If you can contribute to the advice please feel free to add your comment at the end.

Preparation will save you wasting a lot of time and make sure you get maximum comfort.

Before filling a waterbed you must ensure the heat pad of the waterbed heater is correctly positioned. Check the safety liner has no creases in the bottom and especially over the heat pad. Check the corners fit to the corners of either the hardside waterbed frame or the inside foam corners of a softside waterbed.

Lay the mattress inside the waterbed surround. Read the rest of this entry »

Written by High & Dry Waterbeds

July 19th, 2012 at 11:29 am

Posted in Frequently Asked Questions

Tagged with

Emptying a Waterbed

leave a comment

Emptying a waterbed mattress.
So you are moving house, rearranging your bedroom or replacing your old waterbed mattress. Your nearest waterbed retailer should be able to provide a service to suit your circumstances. If this is not possible or they are too expensive you should hire a dedicated extraction pump from your nearest waterbed shop and empty the mattress yourself. If you cannot find a suitable pump then you will need to resort to siphoning the water bed mattress using a garden hose. We strongly advise against siphoning the mattress but if this is a last resort we have written this article based on years of experience to help you as best we can. Please be aware that this article is only for advice if you choose to follow it and things go wrong we cannot be held responsible. In order to fully empty your waterbed mattress you must follow these instructions meticulously.
Step 1
Unplug the waterbed heater. And remove as much air from the mattress as possible. Before you begin you will need a long hose and a roll of electrical insulating tape.

To empty the waterbed mattress

To empty the waterbed mattress

Step 2

Nearly all modern waterbed mattresses contain layers of fibre to reduce the movement, this fibre will prevent you from siphoning the water successfully. You will need to push the fibre away from the valve. This is done by putting your fists either side of the valve and pushing towards the head end of the waterbed. Repeat this process several times until you have created a well around the valve with no fibre.

Moving the waterbed mattress fiber

Moving the waterbed mattress fiber

 

shifting the waterbed fiber

shifting the waterbed fiber

 

shifting the water bed fiber

shifting the water bed fiber

 

 

 

 

 

 

 

 

 

shifting waterbed fiber

shifting waterbed fiber

 

Holding the water mattress fiber

Holding the water mattress fiber

 

Holding the waterbed fiber

Holding the waterbed fiber

 

 

 

 

 

 

 

 

 

 

Step 3

Inspect through the valve that the fiber has moved away, the two images are a before and after. If the fiber has not gone you should try again more forcefully.

Waterbed Mattress valve

Waterbed Mattress valve

Waterbed mattress valve with no fiber

Waterbed mattress valve with no fiber

 

 

 

 

 

 

 

 

 

Push the hose into the mattress through the valve and guide it under the layers of fiber which are now bunched up forming a well around the valve. The hose only needs to be just a little way under the fiber.

Insert hose into waterbed mattress valve

Insert hose into waterbed mattress valve

 

 

 

 

 

 

 

 

 

Step 4
Using a waterproof tape (insulating tape is best) approximately 2 inches from the valve, wrap the tape around and around the hose until you have built up the outside diameter to be a tight fit into the waterbed valve. Then twist the hose the last few inches into the valve, this should form an airtight seal which is essential.

  • If air can get back in as the mattress empties then the siphon will stop.
Sealing the waterbed valve

Sealing the waterbed valve

 

Air tight seal

Air tight seal

 

 

 

 

 

 

 

 

 

Step 5
Connect the other end of the hose to a water supply and start filling the water bed mattress. Once the water is going into the mattress there is obviously no more air in the hose this is the equivalent of having sucked on the other end of the hose to start the siphon. (getting a mouthful of eight year old waterbed water isn’t advisable) Disconnect the hose from the water supply and drop it down below the height of the bed, down the stairs is preferable.

If you have followed the information correctly, the water will begin siphoning and will continue to pull all the water out having created a vacuum. Although the mattress will still be heavy it should be manageable.

siphoning a waterbed mattress

siphoning a waterbed mattress

siphon a waterbed mattress

siphon a waterbed mattress

 

 

 

 

 

 

 

 

 

When there is no more water coming out remove the hose quickly and replace it with the plug and screw on cap. There will still be a lot of water contained in the fibre. If you lift the head end of the mattress without gripping the fibre inside there is a chance that the fibre layers will slide into a bunch. This will ruin the mattress. Fold the mattress taking care that the fibre layers cannot shift. You should now be able to lift the mattress out of the frame.
If you intend to store the mattress for more than one month, two bottles of 4oz waterbed conditioner should be added at this time. We do not have detailed information on how to do this at this time so you may find it easier to call us on our free phone number for advice.

Through our retail shop in Southsea, Portsmouth we rent a pump for £25. We have to charge this amount as we frequently have to replace the pumps and hoses. Siphoning a 5’ x 6’6” softside waterbed will take around 2 – 4 hours depending on the fall of the hose, whereas the waterbed pump will take approximately 30 minutes and completely vacuum the water bed mattress so it is very easy to transport and store.

As I stated this is a guide to help you but you must also be able to use common sense. If things go wrong, don’t try to sue me as I was just trying to help and I have no money. If you are a bit of a Mr Bean and are likely to create more of a problem, call us as we offer a full range of services nationwide.

Buying a Replacement Waterbed Mattress

leave a comment

Choosing your waterbed mattress

This article has been written to guide customers through the process of choosing a new waterbed mattress.

You are either buying a new waterbed and need a little advice on which quality and stability to go for. Or you already have a waterbed and are buying a replacement waterbed mattress. The following information applies to both.

The first thing to decide is whether you have or will have a hardside waterbed or softside waterbed. A brief description of the difference can be found on our ‘waterbeds page’ but the mattresses are a different size so it is important to decide which one you require.

Secondly choose the size. Options appear on our water bed mattress page. Some additional special sizes can be supplied if needed at an additional charge.

Thirdly is the water mattress stability. Layers of fiber inside the waterbed mattresses absorb the water and so dampen the movement. More fiber means less movement. I could spend hours trying to describe five options of the range of movement. Instead you would be better to watch our short but informative video as a picture tells a thousand words and a video, several thousand!

 
Your fourth choice and possibly the most important is whether you choose twin waterbed mattresses? Read the rest of this entry »

Waterbed Headboard Options

leave a comment

Buying a headboard for a waterbed is not essential but can transform a simple looking bed into a fabulous piece of furniture.

Sitting in a Waterbed is surprisingly comfortable because of the way the water is displaced around you.
Breakfast in a Waterbed is scientifically proven to taste better (I may have made that up) but it has two be more practical and comfortable to lean back against a nicely padded headboard than a pile of pillows that keep moving wedged against a cold wall.

Our Olympia Deluxe is the highest quality waterbed on the market and to do it justice our headboards are also made to the highest standard by qualified craftsmen in our own factory as opposed to mass produced budget headboards. Read the rest of this entry »

Written by High & Dry Waterbeds

July 10th, 2012 at 5:40 pm

Posted in Frequently Asked Questions

Tagged with

Buying a New Waterbed

leave a comment

If you are reading this article I assume you have been told of the many advantages of a waterbed.
The first thing you will need to decide is whether you would like a hard sided waterbed or a soft sided waterbed.

Hardside Waterbeds. When waterbeds became popular many years ago all waterbeds had a hard frame. As the name suggests there is a solid frame that contains the waterbed mattress. Customers that have owned waterbeds for many years will tell friends and relatives that their waterbed is the best bed in the world (myself included) They will also mention that one drawback is that the hard side can make it difficult to get in and out of the bed. Unlike a conventional mattress, if you sit on the water bed mattress near the edge, you will sink right down because all your weight is directly down. This in turn means that your knees are up in the air, so not really practical for sitting on the edge. You will soon develop a technique for sort of rolling out.  Our upholstered range of hardsided waterbed frames soften the hard edge. A small consideration is that the frame also adds to the overall dimension of the bed, so take that into account when calculating what size bed to buy. Fitting a waterbed mattress protector and fitted sheets  is also a bit of a chore in comparison to a softsided waterbed. Despite these disadvantages generally the frame is upholstered or built of solid pine which can have a very nice appearance. The full range can be seen by clicking the image.

A softsided waterbed on the other hand has the appearance of a conventional divan bed. This makes it very versatile, select the headboard that suits your decor, choose the colour and matching base.

Getting in and out is very easy because the top cover is zipped across the whole bed as opposed to just around the mattress.

Because the bed has the appearance of a conventional divan bed it will also take standard sized fitted sheets.

Early and cheap quality waterbeds have a fundamental design fault which means that over a short space of time the side foams will begin to bulge out as a result of the water pressure and anyone sitting on the edge. Our Olympia Deluxe is specifically designed to deal with this issue keeping its shape for years and years as opposed to months.

Support and comfort are equally the same regardless of whether you choose hard or softsides

Having decided which type of water bed will best suit your needs you can then choose the size of the bed you require.

You can choose the stability from a range of five waterbed mattresses and the more specialised option of dual waterbed mattresses. Watch our video for guidance and advice or visit our shop in Southsea.
Softside waterbeds are very versatile. Adding your choice of headboard will customise the appearance of your bed to suit your decor. We have a great range of headboards to choose from.
A drawer unit will provide valuable storage in the base. You may decide to add a spare washable cover and sheets but your waterbed will be supplied with everything you need including the water bed mattress, safety liner, waterbed heater, mattress protector and waterbed conditioner.
All that remains to decide is whether you want one of our technicians to deliver and install the bed for you or if you wish to install the waterbed yourself. We have easy to follow installation guides to help. If you would like to discuss your requirements simply call or email and we will be pleased to help.

Written by High & Dry Waterbeds

June 19th, 2012 at 12:04 pm

Posted in Frequently Asked Questions

Tagged with